Home / Kenmore dryer repair
Kenmore Dryer Repair in Plano, TX
Kenmore is a house brand built by other manufacturers. Your model number tells you who made your dryer, and that decides which parts and faults apply.
Last reviewed October 1, 2026. Written and reviewed by the Plano Dryer Pros team. How we create content
Plano Dryer Pros repairs Kenmore gas and electric dryers in Plano, TX. Kenmore is a Sears house brand built by other manufacturers, so the first three digits of the model number matter: 110 generally means Whirlpool-built, 795 or 796 LG-built and 417 Electrolux-built. That tells us which parts and faults to expect before we arrive.
Key takeaways
- Kenmore dryers are built by other manufacturers, mainly Whirlpool, LG and Electrolux.
- The first three digits of the model number, before the dot, show who built yours.
- Parts and common faults follow the builder, not the Kenmore name.
- You get the full price in writing before any work starts.
Who built your Kenmore dryer
Kenmore appliances are sold under the Kenmore name but built by other manufacturers. The first three digits of the model number, the ones before the dot, usually show which one. The number is on a tag inside the door frame or around the drum opening, or on the back.
| Model prefix | Usually built by | Where to read next |
|---|---|---|
| 110, 106, 562 | Whirlpool | Whirlpool dryer repair |
| 795, 796 | LG | Model-specific faults: see the common problems below |
| 417 | Electrolux (Frigidaire) | Electrolux and Frigidaire dryer repair |
| 336, 790 | Electrolux | Model-specific faults: see the common problems below |
Who makes Kenmore dryers?
Kenmore is a Sears house brand, and its dryers are built by other manufacturers, most often Whirlpool, LG and Electrolux. The first three digits of the model number show which one built yours. That matters for repairs, because the parts and the usual faults follow the builder, not the Kenmore name.
How do I read a Kenmore dryer model number?
Find the model number on the tag inside the door frame, around the drum opening or on the back. Look at the first three digits before the dot: 110 generally points to Whirlpool, 795 or 796 to LG and 417 to Electrolux. A prefix may not always identify the sole builder, so match parts by the full model number.
Common Kenmore dryer problems
The faults follow the platform, but the symptoms are familiar. Find yours and open the guide.
| What the dryer is doing | Likely part | Guide |
|---|---|---|
| Runs, no heat | Thermal fuse, thermostat, heating element, or igniter and coils | Dryer not heating |
| Will not start | Door switch, start switch, thermal fuse, or belt | Won’t start |
| Takes two cycles to dry | Usually the vent, and on LG-built dryers a vent indicator may show | Takes too long to dry |
| Squeals or thumps | Idler pulley, belt or drum rollers | Noisy dryer repair |
| Stops mid-cycle | Thermostat, door switch or sensor | Stops mid-cycle |
What are the most common Kenmore dryer problems?
They follow the builder. A Whirlpool-built Kenmore tends to fail like a Whirlpool, with thermal fuse, belt and element faults. An LG-built one is more electronic, with airflow and sensor issues. Whichever it is, a blocked vent sits behind many of them, so the vent is checked on every repair.
Parts for a Kenmore dryer
Because Kenmore dryers are built by other manufacturers, parts are matched by model number. Many Whirlpool-built Kenmore dryers use Whirlpool-pattern parts, but not every part is the same, so the full model number matters more than the brand name on the front.
Are Kenmore dryer parts the same as Whirlpool parts?
On many Whirlpool-built Kenmore dryers, the parts are Whirlpool-pattern, but not every part is the same, and LG-built and Electrolux-built Kenmores use their builder’s parts. The reliable way to match a part is the full model number, not the Kenmore name. Have it ready when you call.
What Kenmore dryer repair costs in Plano
| Repair | Typical cost (parts and labor) |
|---|---|
| Vent path cleared, airflow restored | $100 to $200 |
| Thermal fuse or thermostat | $150 to $275 |
| Door switch or start switch | $150 to $250 |
| Belt, idler pulley or drum rollers | $200 to $375 |
| Heating element, or gas igniter or coils | $200 to $375 |
| Motor, blower wheel or drum bearing | $300 to $550 |
Typical Plano-area estimates, not a quote. See the dryer repair cost guide.
How much does Kenmore dryer repair cost in Plano?
Most Kenmore dryer repairs in the Plano area fall in the same typical range as other brands, about $150 to $400, parts and labor included. A thermal fuse or thermostat is usually the lower end, and a motor or control board the upper end. These are estimates, not a quote, so ask for the exact price in writing first.
How to book a Kenmore dryer repair
- Call or request a repair online.
- Tell us it is a Kenmore dryer, whether it is gas or electric, and what it is doing.
- Have the model number ready: it is on a tag inside the door frame or on the back.
- You get a time window for the visit.
- The technician diagnoses the fault and you get the full price in writing before any work starts.
The model number is the most useful detail you can give. Read about the whole service on the dryer repair service page, or see GE, Whirlpool and Maytag dryer repair.
About this page
Plano Dryer Pros is an independent repair service. It is not affiliated with, endorsed by or authorized by Sears, Kenmore or the dryer’s manufacturer. Kenmore is a trademark of its owner and is used here only to describe the dryers we repair.
Sources
- iFixit: Kenmore dryer, with the model prefix and manufacturer table
- HomeSpy: how to find the age of a Kenmore appliance, noting a prefix may not always identify the sole manufacturer
- Your dryer’s installation and service manual, which governs over any general guidance on this page
- Plano Dryer Pros estimates of typical local repair pricing, checked against national consumer cost guides for context. See our Editorial Policy.
Frequently asked questions
Is my Kenmore dryer still under warranty?
Check your paperwork, because manufacturer warranties on dryers are usually short and many have expired. If yours is still covered, use the warranty provider first, since work by someone else can affect coverage. After the warranty ends, an independent repair is the usual route.
Is it worth repairing an older Kenmore dryer?
Usually, if it is under about 10 to 12 years old and the repair is a small part such as a fuse, belt or element. If the repair nears half the price of a comparable new dryer, or the drum is rusted, replacing may be smarter.
Where is the model number on a Kenmore dryer?
Look for a tag inside the door frame, around the drum opening or on the back of the dryer, and read the digits before and after the dot. Have the full number ready when you call. A photo of the tag works just as well.
What is a Kenmore Elite dryer?
Kenmore Elite is the brand’s premium line, and many Elite dryers have been built by LG. The model prefix, such as 795 or 796, shows the builder. Elite dryers tend to be more electronic, so the sensors and control board matter more.
Can a blocked vent damage a Kenmore dryer?
Yes. Restricted airflow makes any dryer overheat, which blows thermal fuses, stresses heating elements and trips thermostats, and it is a fire risk. Clearing the vent is the cheapest repair and often prevents repeat failures.
What should I have ready when I call about a Kenmore dryer?
Whether it is gas or electric, the full model number, what the dryer is doing and when it started, and your ZIP code. The model number lets us tell who built the dryer and match the right part.
Get your dryer working again
Call and a person will answer, or request a repair online. You get the full price in writing before any work starts.