Home / Dryer repair cost
Dryer Repair Cost in Plano, TX: 2026 Price Guide
What dryer repairs actually cost in the Plano area, what changes the price, and how to tell when a quote is fair.
Last reviewed September 29, 2026. Written and reviewed by the Plano Dryer Pros team. How we create content
Most dryer repairs in the Plano area run about $150 to $400 including parts and labor. Clearing a vent sits at the low end, heating elements, igniters and belts fall in the middle, and motors, bearings and control boards cost the most. These are typical ranges, not a quote; your exact price should be written down before any work starts.
Key takeaways
- Most Plano dryer repairs run about $150 to $400, parts and labor.
- Clearing a vent is the cheapest fix. Motors and control boards cost the most.
- Ask what failed and how it was tested before you approve a price.
- These are typical ranges, not a quote.
Price guide
What dryer repair costs in Plano
Typical ranges with parts and labor included. Your exact price should be written down before any work starts.
Cheaper than most people fear
- Clearing a blocked vent, the top cause of slow drying, is the cheapest fix.
- Common parts like fuses, belts and elements cost far less than a new dryer.
- Big repairs (motor, board) can approach the price of replacing an older dryer.
Quick fixes
$100 to $275
Vent cleared, thermal fuse, thermostat, door or start switch
Everyday repairs
$200 to $375
Belt, idler pulley, rollers, heating element, gas igniter or coils
Bigger jobs
$300 to $550
Motor, blower wheel or drum bearing: more labor, pricier parts
Control board
$300 to $600+
Often worth comparing with a new dryer if yours is 10+ years old
Typical Plano-area estimates, not a quote. Prices vary by brand, model, part availability and access.
Dryer repair cost by type of repair
Ranges include parts and labor and reflect typical work in the Plano area. Brand, model and access change the final number.
| Repair | What is involved | Typical range |
|---|---|---|
| Vent path cleared, airflow restored | Lint removed from the duct we can reach, hood and flap checked, airflow measured | $100–$200 |
| Thermal fuse or thermostat | Part tested and replaced; vent checked so it does not blow again | $150–$275 |
| Door switch or start switch | Switch tested and replaced | $150–$250 |
| Belt, idler pulley or drum rollers | Panel and drum removed, worn parts replaced, drum tested under load | $200–$375 |
| Heating element (electric) | Element tested and replaced with the matching part | $200–$350 |
| Gas igniter or valve coils | Ignition sequence tested, failed part replaced, full cycle rerun | $200–$375 |
| Motor, blower wheel or drum bearing | Larger job: part and labor both climb | $300–$550 |
| Control board | Board tested; on an older dryer, replacing the machine may make more sense | $300–$600+ |
For context, one national consumer cost guide puts the full spread for dryer repair at roughly $50 to $800, with most jobs landing between about $100 and $300. Local ranges run a little higher once a technician comes to your home.
What is the cheapest dryer repair?
Clearing a restricted vent is usually the cheapest fix, typically about $100 to $200 in the Plano area. Switches and thermal fuses come next, at roughly $150 to $275. Because a blocked vent causes many other failures, fixing airflow is often the best first repair.
What you are paying for
- The service call. Travel and diagnosis. Ask about the fee when you book, and whether it is credited to the repair.
- The part. Usually the biggest variable. A common belt is cheap; a control board for a newer model is not.
- Labor. Time to open the dryer, replace the part and test it.
- Extras. Clearing the vent, or a second visit if a part has to be ordered.
A fair quote lists these separately.
Dryer repair cost by symptom
| What the dryer does | Usual repair | Typical range |
|---|---|---|
| Runs, no heat (electric) | Thermal fuse, element or thermostat | $150–$350 |
| Runs, no heat (gas) | Igniter or gas valve coils | $200–$375 |
| Takes two cycles | Vent cleared, airflow restored | $100–$200 |
| Won’t start | Door switch, start switch or thermal fuse | $150–$275 |
| Squeals or thumps | Belt, idler pulley or rollers | $200–$375 |
| Grinds or rumbles | Drum bearing or rollers | $300–$550 |
Learn more: dryer not heating, dryer takes too long to dry and dryer won’t start.
What is the most expensive dryer repair?
Control boards, motors and drum bearings are usually the most expensive repairs, roughly $300 to $600 or more with parts and labor. On an older dryer, these repairs can approach the price of a new machine, so get the quote in writing and compare before you approve it.
Is dryer repair more expensive for gas dryers than electric?
Repair costs are similar. A gas igniter or valve coils typically run about $200 to $375, and an electric heating element about $200 to $350. Gas dryers can cost slightly more when gas parts are involved, but the failed part and the brand matter more than the fuel.
Why quotes for the same repair can vary so much
- Diagnosis quality. A technician who tests every part may replace one; one who guesses may replace three.
- Part quality and source. Original-manufacturer parts cost more than generic ones.
- Access. A stacked unit or a tight closet takes longer.
- Whether the part is on the truck. If not, you may pay for a second visit.
- Overhead. Franchises, call centers and lead-generation sites add cost that a local technician may not.
How to avoid overpaying for dryer repair
- Ask what failed and how it was tested. A meter reading is a real answer.
- Ask whether the vent was checked. A fuse or element that keeps failing is often an airflow problem.
- Get the price in writing, itemized, before work starts.
- If a number feels high, ask what a comparable new dryer would cost, then read repair or replace a dryer.
- If you decline, ask what you owe for the visit before you agree to it.
How does dryer repair cost compare with buying a new dryer?
Most Plano repairs cost about $150 to $400, while a comparable new dryer commonly costs several hundred dollars or more, plus delivery, hookup and haul-away. Repair usually wins for small parts on a dryer under about 10 to 12 years old. If the repair nears half the price of new, replacing may be smarter.
Does a home warranty pay for dryer repair?
Some home warranty plans cover dryers, but many require you to use their approved providers and charge a service fee. Read your contract, contact the plan first, and ask whether a repair company accepts your plan before booking, so you are not stuck paying out of pocket.
Should I get a second opinion on a dryer repair quote?
Yes, it is reasonable if a quote feels high. Ask what failed and how it was tested, get the price in writing, then compare it with another company or with the price of a new dryer. A good technician will not mind you checking.
How to keep dryer repair costs down
- Clean the lint screen after every load and wash it with soap and water a couple of times a year.
- Check the outside vent hood; the flap should open when the dryer runs.
- Replace flexible foil duct with rigid or semi-rigid metal where you can.
- Treat a second drying cycle as an early warning, not a normal thing.
Sources
- Plano Dryer Pros estimates of typical local repair pricing, checked against national consumer cost guides for context. Ranges are labeled as estimates. See our Editorial Policy.
- Your dryer’s installation and service manual, which governs over any general guidance on this page
Frequently asked questions
What is the average cost of dryer repair in Plano?
Most repairs in the Plano area run about $150 to $400 including parts and labor. Vent clearing is at the low end and motors, bearings and control boards at the high end.
Why is there a service call fee?
It covers travel and the diagnosis. Ask about the fee when you book, and ask whether it is credited toward the repair if you go ahead.
Do these ranges include parts?
Yes. Ranges cover parts and labor for the repair. A written quote should still list the part, labor and any fee as separate lines.
Is a $500 dryer repair quote reasonable?
For a common part like a belt, fuse or element, that is worth questioning. For a motor, bearing or control board on a newer dryer, it can be realistic. Ask what failed, how it was tested, and what a comparable new dryer costs.
Can I save money by buying the part myself?
Policies vary by company, so ask before you order. A wrong part costs more than the saving, and some companies will not warranty a part they did not supply.
Are repairs on older dryers more expensive?
Not always, but parts for older models can be harder to find, and a big repair on an old dryer has to be weighed against what the machine is worth.
Get your dryer working again
Call and a person will answer, or request a repair online. You get the full price in writing before any work starts.